First, before using the automatic winding machine, confirm the power supply:

The voltage of our automatic winding machine is all at AC 220 V 10% in one direction. Make sure that the voltage and voltage are within the above range. If the range of the automatic winding machine is unstable, it is likely to cause voltage damage of the automatic winding machine.

Second, before using the automatic winding machine, confirm the air pressure:

Front view of automatic winding machine

The air pressure required by this equipment is within the range of 0.5mpa±0.1mpa. Before using the automatic winding machine, please adjust the air pressure to the above range. When the air pressure is too low, turn off the power supply of the automatic winding machine to make the equipment in a stagnant state. After the above two operations, turn on the green power switch on the right side of the automatic winding machine.

Three, before using the automatic winding machine, reset:

① Before the automatic winding machine is used, the main air source must be turned on and the equipment must be reset to the original point.

② Press the reset button to restore the automatic winding machine to its original position, that is, the reset is completed, which means that the reset light is turned on.

(3) When the original position of the automatic winding machine does not match, the equipment will give an alarm and display the alarm content, which can be effectively relieved by referring to the 1/0 table.